DL 2110-131K( PROGRAMMABLE LOGIC CONTROLLERS MODULAR TRAINER)

Th is modular trainer allows the study of PLC and/ or MMI. Th e modular panel is a tubular steel structure, treated with electrostatic painting, dimensions: w= 660 mm, h= 935 mm, d= 350mm. It has 4 lines for manual and fast fi xation of the modules without the need for tools. Each module is made of steel plate, treated with electrostatic painting. All terminals and connection points are available through 2 or 4 mm terminals ( according to the voltage) . Th e dimensions of the modules are 200 x 110 mm. or multiples. Th e components, as well as their terminals and access points, are identifi ed with the respective symbol printed in silk-screen. • PLC module: a Programmable Logic Controller with integrated Man-Machine Interface ( MMI) and liquid crystal display. It includes the programming software. Confi guration: 8 transistor digital inputs ( 24 Vdc) , 6 transistor digital outputs ( 24 Vdc) , 4 analogue inputs ( 0-10 Vdc) , 1 analogue output ( 0-10 Vdc) , 1 pulse fast counting input ( 4 kHz) . All of the inputs and outputs are accessible through 2 mm terminals and identifi ed with symbol in silk-screen. • Input power module, with protection switch and lights. Power supply: single-phase from mains. • Power supply module with polarity inversion and over-current protection. Outputs: 12 Vdc, 24 Vdc and 0 ÷ 24 Vdc. • Module with switches for digital input signals simulation. It includes 8 fi xed contact switches with retention, NC/ NO, for simulating the logic levels. • Module with switches for digital input signals simulation. It includes 8 contact pulse switches, NC/ NO. • Module with switches for digital input signals simulation. It includes 4 contact pulse switches, NC/ NO and 4 contact retention switches, NC/ NO. • Module with 8 led for light indication of output digital signals, suitable for PLC with NPN or PNP outputs. • Module with 2 linear potentiometers for simulation of voltage or current signals ( 4 to 20 mA and 0 to 12 Vdc) . • Module for analogue signals measurement. Possibility to measure 2 signals simultaneously. One of the inputs is suitable for current signals from 4 to 20 mA and the other for voltage signals from 0 to 10 Vdc. • Module with step motor, with 4 bits electronic driver, with light indication for each bit. • Module with 4 relays for 10 A and 24 Vdc coil, suitable for PLC with NPN or PNP outputs. • Module with DC motor and encoder, suitable for PLC with NPN or PNP inputs. • Module with Analogue/ Digital converter. 4 bits A/ D converter, with analogue signals input from 0 to 5 Vdc / 0 to 24 Vdc and output from 4 to 20 mA and 4 bits in 24 Vdc. • Module for Digital/ Analogue converter. 4 bits D/ A converter, with maximum analogue output signals adjustable from 5 to 24 Vdc and from 4 to 20 mA and 4 bits from 5 to 24 Vdc input. Supplied with a set of 30 connection cables, 2 and 4 mm, and an experiment manual.